MIL-DTL-62422D(AT)
4.3 Conformance inspection. Conformance inspection shall consist of the examinations
of 4.3.4 and the tests (100%) of 4.3.5. Noncompliance with any of the specified requirements in
section 3 shall be cause for rejection.
4.3.1 Sampling inspection. Unless otherwise specified (see 6.2), the sampling plan
specified herein shall be used.
4.3.2 Lot formation. An inspection lot shall consist of all filters of the same category,
made from the same production batch, manufactured under essentially the same conditions and at
essentially the same time, and submitted at the same time for acceptance.
4.3.3 Sample. Unless otherwise specified (see 6.2), the sample for CI examinations and
tests shall be randomly selected from the inspection lot in accordance with table IV.
4.3.4 CI examinations. The sample selected in accordance with 4.3.3 shall be examined
for the defects specified in table II.
TABLE IV. Sampling plan for CI.
Sample size
Inspection
Examination
Test (100%)
lot size
Major
Minor
Critical
2 to 8
*
5
*
9 to 15
13
5
*
16 to 25
13
5
*
26 to 50
13
5
*
51 to 90
13
7
*
91 to 150
13
11
*
151 to 280
20
13
*
281 to 500
29
16
*
501 to 1200
34
19
*
1201 to 3200
42
23
*
3201 to 10 000
50
29
*
10 001 to 35 000
60
35
*
35 001 to 150 000
74
40
*
150 001 to 500 000
90
40
*
500 001 and over
102
40
*
* Indicates entire lot shall be inspected (100% inspection).
4.3.5 CI tests (100%). Each filter shall be subjected to the CI tests specified in table III.
4.3.6 CI failure. Any item that fails to conform to any specified requirement shall be
rejected; any failure (one or more) of the selected sample in either the Major/Minor categories or
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business